296 Brock Ave, Toronto, ON M6K 2M4

How to Fix Leaky Faucets? Step-by-Step Guide

by | Jun 15, 2025

You may find a leakage issue in the bathroom faucet or kitchen faucet that can be challenging to fix. If any of your faucets are leaking due to faults in parts, you must not ignore them. By overlooking these issues, you will find high water bills, damage to your properties, and a harmful environment in your house.

In this case, locating a dripping faucet is necessary. To do this, you can easily turn off the water supply and remove the handle of the faucet. Look for any leakage and replace the damaged part. At last, regroup everything once again and you are done restoring the leaky faucet.

In this blog post, you will uncover the reasons behind leaky faucets, why fixing faucets is important, and how you can fix a dripping spigot. So, go through the complete blog and find out all the required information with an easy explanation.

Why Do Faucets Leak?

Faucet leak happens due to certain reasons including worn-out washers, faulty seals, damaged o-rings, loose parts, water pressure variations, and the age of faucets.  A faucet leak might seem like a minor problem but it can waste water and increase your utility bills. Many homeowners face leaky faucet issues but cannot identify the reason behind them.

A faucet is made with mechanical parts that wear out and loosen over time. The easiest way to know your faucet has loosened out when the handle wobbles. Apart from this, o-rings are one type of seal that most cartridge type faucets are made of.

If your faucet is leaking at the handle, there can be a reason for faulty o-rings. Similarly, washers are part of the faucet and help in sealing it. If a washer wears out, it can cause leakage. Such reasons are culprits that can tear down your faucets.

Why Is Fixing Leaky Faucets Important?

Avoiding leaky faucets can drive bigger issues in the near future. Many homeowners skip the minor plumbing issues that can put your home in danger. If you don’t fix a leaky faucet on time, there is ample water waste. According to one study, a faucet that drips six drops a minute will lose 1200 litres of water annually, equivalent to seven bathtubs.

The leakage can cause the growth of bacteria or mould and can damage your property. Plus, fixing a leaky faucet promotes sustainable living and keeps your environment healthy and peaceful.

How Do I Repair a Leaking Faucet? Step-by-Step Guide

Endless dripping faucets can test a homeowner’s patience. You can experience various kinds of issues, such as a bathtub faucet leaking, a tub faucet leaking, or a broken faucet. Great news now! Know how to fix a leaky faucet with our step-by-step guidance below.

1. Shut Down The Water Supply

At the time of repairing the faucet, the first step to take is to turn off the water supply. This will help avoid any water damage. To do this, turn off the valve which is located under the sink. Once you shut off the valve, open the faucet fixture and do the required repairs.

2. Remove The Handle

To fix a leaky faucet, pull the faucet handle so you can see the internal parts clearly. Then, extract the cap on the faucet handle to uncover the screw. With the use of a hand driver, remove the screw. Then, remove the handle.

3. Find The Origin of Leaks

Once you remove the handle, check for any signs of leakage. Some common issues you may find are wash-out o-rings or washers. Inspect for any damage that happens to o-rings or other parts. Closely notice if there are any cracks.

4. Replace The Worn Washer Or Any Broken Part

After locating the faulty part, replacing it usually takes less time. Visit the hardware store and get your parts replaced. Then, replace the damaged part and install a new part. Make sure to fit the part correctly and maintain proper alignment.

5. Reassemble The Faucet

After fixing and replacing the damaged part, reassemble the faucet. During this time, it’s important to verify that all parts are put together properly to avoid any issues that may arise in the future. For that, put the handle back and fit it with the screw. Replace the cap and turn on the water supply to check for any leakage. If you still have issues with the leaky faucet repair, then call a professional to look into the problem.

Conclusion

Fixing a dripping faucet might seem like a big task, but with the correct guidelines, you can repair it. There are multiple types of faucet issues including bathtub faucet leaking, tub faucet leaking, or broken faucets that homeowners face. However, following the guidelines will give you a better approach to handling the leaky faucet.

Call Pro For Your Plumbing Needs

Many times, homeowners are juggling between responsibilities and may not find time to replace or repair the faucet leak on their own. In this crucial time, getting a professional plumber near you will be a big help. Don’t wait to call TrustFlow and our technicians will be right there to give you a helping hand.

Related Posts

Book A Plumber
Under 2 mins!

3 + 14 =